Features

  • • LC-HD’s lever design utilizes a flexible “pull-tab” allowing for the connector to be disengaged easily from densely loaded panels without the need for special tools.
    • IEEE 802.3u, IEC 60794, TIA/EIA-568.B.3 compliant
    • 9/125μm Single Mode that offers a great wide broadband
    • Telcordia GR-326 and IEEE 802.3u/802.3x/802.3z/802.3j standards tested
    • 9/125μm Single Mode
    • 2mm, and 3mm Simplex

 
 
01 mp   02 mp   03 mp  

Easy to release trigger connector

The LC-HD’s lever design utilizes a
flexible “pull-tab” allowing for the
connector to be disengaged easily
from densely loaded panels without
the need for special tools.
“Pull-Tabs” are available in three
standard lengths and multiple
colors.

60% increase in density

The LC-HD connector can be removed
using a simple pull tab, it eliminates
the need for finger access to the LC
connectors latch mechanism, therefore
LC adapters can now be mounted much
closer than spacing required in the past.

Stackable adapters

The LC adapter spacing was
limited by the room required to reach
LC connectors with the human fingers or
with special tools. The overall height of
standard LC connectors also required a
small vertical space above and below the
LC adapters. The low profile Senko LCHD,
together with it’s pull tab allow the
LC adapter to be stacked with absolutely
no vertical space.

 

Ordering Information

ho i ada

How to choose optical fiber patch cord?

 

The Optial Fiber Patch Cord is available for any kind of configurations you need.

ordering

Take me to choose a connector!

Transceiver-Overview!