PoE Injector




Increased Flexibility, Reduced Installation Time and Cost 

The Starview PoE injector allows delivery of both data and power
to a Starview access point over a single Ethernet cable, allowing
deployment of devices exactly where they are needed to provide
the best wireless coverage at a much lower installation cost.



• 1 Port at 10/100/1000 Mbps
• Supports Up to 35W of POE power
• Compatible with IEEE 802.3af/at Standards
• Easy Installation - Parallel Slide-in Design for Multiple Units
• Safety Protection on Low Power Devices



Use PoE Injector with PD to expand your network to where there are no power lines or outlets,
where you wish to fx devices such as APs, IP Cameras or P Phones, etc.




1.Use a CATS UTP cable to connect port of Ethernet device to the DATA N port
2.Connect AC cable with Injector and Socket
3.Connect the PoE OUT port to a PD with CATS lJTP cable.




No. of channels:10/100/1000 Mbps
Pass Through Data Rates
• Pin Assignment and Polarity: 1/2 (-), 3/6 (+)
• Output Power Voltage: 5OVDC
• User Port Power: 15.4W /35W
Input Power Requirements
• AC Input Voltage: 100 to 240 VAC
• AC Input Current: 0. 5A 100-240 VAC
• AC Frequency: 50 to 60 Hz
Dimensions:145 mm x 60mm x 40mm
• System Indicator: AC Power
• User Indicator: Channel Power
Shielded RJ-45, EIA 568A and 568B
• Over current protection
• Over load protection
• Over voltage protection
• Over voltage protection
Environmental Conditions
• Operating Ambient Temperature:-10℃ to 45℃
• Operating Humidity:Maximum 85%, Non-condensing
• Storage Temperature: :-10℃to 60℃
• Storage Humidity: Maximum 90%, Non-condensing


Patch Panel









Starview 19-inch Rack-mount Fiber Optic Distibution Frame for FC,SC,ST,LC adapters. The enclosure is constructed of steel material
and it’s front panel is designed to easily remove for cabling and connector installation.



• Standard size, light weight and reasonable structure
• Compact design for space saving
• Front mark on the plate is easy for identification and operation
• Easy for management and operation
• Supports Multimode and Singlemode fiber splitting
• Wide Operating Temperature:
• From -40°Cto 85°C
• High Reliability and Stability



• Transition from Backbone cabling to distribution switching
• Interconnect to active equipment in server cabinet
• Cross connect or inter-connect



• Telcordia GR-1209-CORE
• Telcordia GR-1221-CORE
• RoHS


Type: Drawer type 19” rack mounted


Max capacity(cores):
1U - SC/FC/ST 12
1U - FC/ST 24
1U - 2SC 48
2U - FC/ST 48
4U - 2SC144


MPO Cassette






Starview 19-inch Rack-mount Fiber Optic Distibution Frame for FC,SC,ST,LC adapters. The enclosure is constructed of steel material and it’s front panel is designed to easily remove for cabling and connector installation.


MPO Cassette Module

The MPO Cassette modules provide the interface between the MPO on the trunk and the LC duplex and jumpers and that will then connect directly into the electronics.


● Data Center LAN/SAN

Features and Applications:

● Simple to use, convenient installation
● High density easy-plug cassette solution up to 96-fiber per 1U rack enclosure
● Improve cable manageability
● Pre-installed 12 or 24 fiber MPO adapter at the rear, choices of SC, LC adaptors at the front panel (faceplate)
● Can be pre-installed with factory-terminated & factory-tested MPO/MTP hydra assembly inside cassette module


MPO Cassette Management Panels

MPO cassette management panel is designed to manage and house easy-plug MPO to LC fiber cassette modules, for connecting plug-and-play pre-terminated high density MPO Fiber cabling system. This solution contributes to greater network availability that especially suitable for SAN, LAN and Data Center applications. Each easy-plug MPO to LC cassette is accommodated with a 12/24-fiber MPO based fiber assemblies, and pre-loaded with LC adapters in different fiber modes for your choices

● Up to 4 Small/MTP modules in 1U
● Multiple adaptor options available
● Accepts loose tube, distribution and pre-terminated cables
● ROHS, REACH SvHC and UL rated
● Fits standard 19”

● Data center
● Telecommunication networks



MPO Cassette Module

● Fiber Type:OM3/OM4
● Fiber Count:12/24
● Number of Adapters per Panel:6
● Adapter Type Front:LC Duplex
● Adapter Color Front:Aqua/Purple
● Adapter Type Back:MPO
● Adapter Color Back:Black

MPO Cassette Management Panels

● U Size:1U
● Number of Ports:4
● Dimension:482mm X 380mm X 44mm
● Weight:3kg
● Color: Black
● Designed in Accordance With:TIA/EIA 568.C, ISO/IEC 11801, EN50173, IEC60304, IEC61754,EN297-1
● Compliant to:RoHS, Reach/SVHC

PoE Extender




Outdoor use weather-proof Single port PoE extender- a quality product for PoE
network point-to-point up to 500m. Works with PoE standards IEEE802.3af and IEEE802.3at.
This device serves as a data switch port that is powered by PoE, and transmits it further on
another 100m together with the data. Depending on the amount of power consumption. may
use up to 4 extensions in the same chain, thereby increasing transmission
distance up to 500m (1 class 82.3af, see table. "Maximum distance")



• Industrial Grade -40 to 70℃
• Mini-size, wall mounting
• Requires no external power supply
• Low power consumption, only 1.2W
• Auto-sensing PoE devices
• Compatibility with 802.3at and 802.3af

Typical connection diagram

1 0


PoE Device (PD)

PoE Injector or Switch
IEEE802.3af (max 15.4W)

PoE Plus Injector or Switch
IEEE802.3at (max 30W)

IEEE802.3af class 1  no more than 4W

400m (3pcs PoE Extender)

500m (4pcs PoE Extender)

IEEE802.3af class 2  no more than 6W

300m (2pcs PoE Extender)

400m (3pcs PoE Extender)

IEEE802.3af class 0&3  no more than 12W

200m (1pcs PoE Extender)

300m (2pcs PoE Extender)

IEEE802.3at  no more than 22W

Not applicable

200m (1pcs PoE Extender)



Maximum Distances for Power Sources

Multiple PoE Extenders can be connected every 100 meters to obtain greater distances. The actual figures depend on operating conditions.
The range is over 24 AWG or heavier Cat-5e or Cat-6 cable except where specified.

Examples for medium power PoE Devices (that are PoE Class 2, or require under 6 watts)

PoE Source
PoE switch (802.3af,Output voltages  50V) 15W mid-span (802.3af,Output voltages  50V) PoE+ switch (802.3at,Output voltages 50V) 30W mid-span (802.3at,Output voltages 50V)
Maximum Distances
300m 300m 400m 400m

Examples for full power PoE Devices (that are PoE Class 0 or 3, or require under 12 watts)

PoE Source
PoE switch (802.3af,Output voltages  50V) 15W mid-span (802.3af,Output voltages  50V) PoE+ switch (802.3at,Output voltages  50V) 30W mid-span (802.3at,Output voltages  50V)
Maximum Distances
200m 200m 300m 300m

Examples for PoE+ Devices (that are PoE Class 4 that under 22 watts, or 802.3at compliant)

PoE Source
PoE switch (802.3af,Output voltages  50V) 15W mid-span (802.3af,Output voltages  50V) PoE+ switch (802.3at,Output voltages  50V) 30W mid-span (802.3at,Output voltages  50V)
Maximum Distances
Not applicable Not applicable 200m 200m




No. of channels:1

Pass Through Data Rates:10/100/1000 Mbps half / full duplex

PoE input

Pin Assignment and Polarity: Both 1/2 (-), 3/6 (+) and 7/8 (-), 4/5 (+)

PoE output

Pin Assignment and Polarity: 1/2 (-), 3/6 (+)

Output Power: up to 22W


Power indicator: PoE enabled

Network indicator: Link/Act

Connectors:Shielded RJ-45, EIA 568A and 568B

Network cables:Shielded category 5 (or higher)

Case material:ABS plastic

Dimensions:145mm x 60mm x 40mm


Mounting:Wall of shelf


Environmental Conditions

Operating Ambient Temperature: -40 to 45℃ @90%, Non-condensing

Storage Temperature: -40 to 70 @95%, Non-condensing

Regulatory Compliance

IEEE 802.3af (PoE), IEEE 802.3at (PoE+)

RoHS Compliant, CE, FCC

Electromagnetic:FCC Part15, Class B




How to choose optical fiber patch cord?


The Optial Fiber Patch Cord is available for any kind of configurations you need.


Take me to choose a connector!