PoE Extender

 

Outdoor use weather-proof Single port PoE extender- a quality product for PoE
network point-to-point up to 500m. Works with PoE standards IEEE802.3af and IEEE802.3at.
This device serves as a data switch port that is powered by PoE, and transmits it further on
another 100m together with the data. Depending on the amount of power consumption. may
use up to 4 extensions in the same chain, thereby increasing transmission
distance up to 500m (1 class 82.3af, see table. "Maximum distance")

 

Features 

• Industrial Grade -40 to 70℃
• Mini-size, wall mounting
• Requires no external power supply
• Low power consumption, only 1.2W
• Auto-sensing PoE devices
• Compatibility with 802.3at and 802.3af


Typical connection diagram

 

PoE Device (PD)

PoE Injector or Switch
IEEE802.3af (max 15.4W)

PoE Plus Injector or Switch
IEEE802.3at (max 30W)

IEEE802.3af class 1  no more than 4W

400m (3pcs PoE Extender)

500m (4pcs PoE Extender)

IEEE802.3af class 2  no more than 6W

300m (2pcs PoE Extender)

400m (3pcs PoE Extender)

IEEE802.3af class 0&3  no more than 12W

200m (1pcs PoE Extender)

300m (2pcs PoE Extender)

IEEE802.3at  no more than 22W

Not applicable

200m (1pcs PoE Extender)

 

 

Maximum Distances for Power Sources

Multiple PoE Extenders can be connected every 100 meters to obtain greater distances. The actual figures depend on operating conditions.
The range is over 24 AWG or heavier Cat-5e or Cat-6 cable except where specified.


Examples for medium power PoE Devices (that are PoE Class 2, or require under 6 watts)

PoE Source
PoE switch (802.3af,Output voltages  50V) 15W mid-span (802.3af,Output voltages  50V) PoE+ switch (802.3at,Output voltages 50V) 30W mid-span (802.3at,Output voltages 50V)
Maximum Distances
300m 300m 400m 400m


Examples for full power PoE Devices (that are PoE Class 0 or 3, or require under 12 watts)

PoE Source
PoE switch (802.3af,Output voltages  50V) 15W mid-span (802.3af,Output voltages  50V) PoE+ switch (802.3at,Output voltages  50V) 30W mid-span (802.3at,Output voltages  50V)
Maximum Distances
200m 200m 300m 300m


Examples for PoE+ Devices (that are PoE Class 4 that under 22 watts, or 802.3at compliant)

PoE Source
PoE switch (802.3af,Output voltages  50V) 15W mid-span (802.3af,Output voltages  50V) PoE+ switch (802.3at,Output voltages  50V) 30W mid-span (802.3at,Output voltages  50V)
Maximum Distances
Not applicable Not applicable 200m 200m

 

 

 

Specification

No. of channels:1

Pass Through Data Rates:10/100/1000 Mbps half / full duplex

PoE input

Pin Assignment and Polarity: Both 1/2 (-), 3/6 (+) and 7/8 (-), 4/5 (+)

PoE output

Pin Assignment and Polarity: 1/2 (-), 3/6 (+)

Output Power: up to 22W

Indicators

Power indicator: PoE enabled

Network indicator: Link/Act

Connectors:Shielded RJ-45, EIA 568A and 568B

Network cables:Shielded category 5 (or higher)

Case material:ABS plastic

Dimensions:145mm x 60mm x 40mm

Weight:0.090g

Mounting:Wall of shelf

Environment:Indoor

Environmental Conditions

Operating Ambient Temperature: -40 to 45℃ @90%, Non-condensing

Storage Temperature: -40 to 70 @95%, Non-condensing

Regulatory Compliance

IEEE 802.3af (PoE), IEEE 802.3at (PoE+)

RoHS Compliant, CE, FCC

Electromagnetic:FCC Part15, Class B

 

 

Ordering Information

SV-EXT-POE+

Starview Outdoor 10/100/1000Base-T 1-port PoE+ enabled Extender

 

Support

  Starview Tech Support & Customer Service access you to open troubleshooting tickets

Technical Support


+65 6100 DESK (+65 6100 3375)
Customer Portal
Facebook
LinkedIn

Location


Singapore Headquarters
60 Kaki Bukit Place #05-19 Eunos Techpark
Singapore 415979

Tel: +65 3157 5338
Fax: +65 3112 8181

© 2018 Starview International. All Rights Reserved.