Key Features
- Single fiber transmission able to multiplex 18 CWDM channels (Not many competitors can do 18CH CWDM over 1 single fiber), usually connected at the BBU
- Single fiber Optical Add and Drop of CWDM channels (available with 3CH/ 4CH/ 6CH/ 9CH), usually connected at the RRU
CWDM Regenerator
Full Bi-Directional 3R functionality per each service
Flexible, user configurable Multirate Interfaces support for:
- FE, GbE, 10G Eth LAN/WAN , STM1/4/16/64, OC3/OC12/OC48/OC192, SD-SDI, HD-SDI, 1/2/4/8/10/16G FC
- CPRI : 614.4Mbit/s, 1228.8 Mbit/s, 2457.6 Mbit/s, 3072.0 Mbit/s, 4915.2 Mbit/s , 6144.0 Mbit/s ,9830.4 Mbit/sec
Performance Monitoring on all interfaces
Transparent, Ultra Low latency
Integrated CWDM Mux/DeMux) inside the unit
Dual redundant pluggable AC/DC PSU and FAN unit
Specification
1 Channel Optical Add/Drop (4 ch. group) Specific Optical Specs
• Operating Wavelength: 1500nm ~ 1620nm
• Center Wavelength (λc): 1510nm ~ 1610nm
• Add/Drop Ch. Max Insertion Loss: 0.7 dB
• Pass Ch. Max Insertion Loss: 1.0 dB
1 Channel Optical Add/Drop (8 ch. group) Specific Optical Specs
• Operating Wavelength: 1460nm ~ 1620nm
• Center Wavelength (λc): 1470nm ~ 1610nm
• Add/Drop Ch. Max Insertion Loss: 0.7 dB
• Pass Ch. Max Insertion Loss: 1.0 dB
General Optical Specs(applies to all CWDM configurations)
• Insertion Loss Temperature Sensitivity (dB/°C): <0.005
• Wavelength Temperature Shifting (nm/°C): <0.002
• Polarization Dependent Loss (dB): <0.1
• Polarization Mode Dispersion (PS): <0.1
• Directivity (dB): >50
• Return Loss (dB): >45
• Maximum Power Handling (mW): 500
Environment
• Operating Temperature:-5°C~+75°C
• Storage Temperature:-40°C~85°C
Note: Above specification are for device without connector
