Key Features
- Single fiber transmission able to multiplex 18 CWDM channels (Not many competitors can do 18CH CWDM over 1 single fiber), usually connected at the BBU
- Single fiber Optical Add and Drop of CWDM channels (available with 3CH/ 4CH/ 6CH/ 9CH), usually connected at the RRU
CWDM Regenerator
Full Bi-Directional 3R functionality per each service
Flexible, user configurable Multirate Interfaces support for:
- FE, GbE, 10G Eth LAN/WAN , STM1/4/16/64, OC3/OC12/OC48/OC192, SD-SDI, HD-SDI, 1/2/4/8/10/16G FC
- CPRI : 614.4Mbit/s, 1228.8 Mbit/s, 2457.6 Mbit/s, 3072.0 Mbit/s, 4915.2 Mbit/s , 6144.0 Mbit/s ,9830.4 Mbit/sec
Performance Monitoring on all interfaces
Transparent, Ultra Low latency
Integrated CWDM Mux/DeMux) inside the unit
Dual redundant pluggable AC/DC PSU and FAN unit
Specification
4 Channel Mux/Demux Specific Optical Specs
- Operating Wavelength: 1500nm ~ 1620nm
- Center Wavelength (λc): 1510nm ~ 1610nm
- Max Insertion Loss*: 1.7 dB/channel
5 Channel Mux/Demux Specific Optical Specs
- CWDM Operating Wavelength: 1500nm ~ 1620nm
- CWDM Center Wavelength (λc): 1510nm ~ 1610nm
- 1310nm Ch. Operating Wavelength: 1260nm ~ 1360nm
- 1310nm Ch. Center Wavelength (λc): 1310nm
- CWDM Max. Insertion Loss*: 2.0 dB/channel
- 1310nm Ch. Max Insertion Loss*: 1.0 dB/channel
- 1310nm Ch. Port Isolation: 30 dB Min.
8/9 Channel Mux/Demux Specific Optical Specs
- Channel Wavelength:1270nm ~ 1610nm
- Center wavelength Accuracy:±0.5 nm
- Channel Spacing:20 nm
- Channel Passband @-0.5dB bandwidth:>13 nm
- Insertion Loss:≤2.5 dB
- Channel Uniformity:≤1.0 dB
- Channel Ripple:0.3 dB
- Isolation Adjacent:>30dB (Demux)
- Isolation Non-adjacent:>40dB(Demux)
16/18 Channel Mux/Demux Specific Optical Specs
- Channel Wavelength:1270nm ~1610nm
- Center wavelength Accuracy:±0.5 nm
- Channel Spacing:20 nm
- Channel Passband(@-0.5dB bandwidth:>13 nm
- Insertion Loss:≤3.5 dB
- Channel Uniformity:≤1.5 dB
- Channel Ripple:0.3dB
- Isolation Adjacent:>30dB(Demux)
- Isolation Non-adjacent:>40dB(Demux)
General Optical Specs(applies to all CWDM configurations)
- Insertion Loss Temperature Sensitivity:<0.005dB/°C
- Wavelength Temperature Shifting:<0.002nm/°C
- Polarization Dependent Loss:<0.1dB
- Polarization Mode Dispersion:<0.1PS
- Directivity:>50dB
- Return Loss:>45dB
- Maximum Power Handling:500mW
Environment
- Operating Temperature:-5°C~+75°C
- Storage Temperature:-40°C~85°C
Note: Above specification are for device without connector
Support
CWDM with dual fiber connection
CWDM with single fiber connection
|
Starview Tech Support & Customer Service access you to open troubleshooting tickets |
