PoE++ Injector
Application
• VoIP Telephones; IP Security Cameras
• Wireless Network Access Points and Bridges
• Any other PoE powered device
Features
• Compact design with interlocking installation
• Full Protection OCP, OVP
• Non-Vented Case
• Gigabit Compatible
• Supports IEEE 802.3 bt/at/af
• Continuous flow of power with NO detection
Specification
Data LAN: 10/100/1000T RJ-45 female
Ports: Single Port data & power out
Cable:
• EIA/TIA-568 100-ohm (100m) ;
• 10T: 4-pair UTP/STP Cat.3, 4, 5;
• 100TX: 2 and 4-pair UTP/STP Cat.5;
• 1000T: 4-pair UTP/STP Cat.5
Data&Power Out:
• Power Feed Pins: 1/2-, 3/6+; & 4/5+,7/8-
• Data on Pins: full duplex;
Output Voltage: 48-56VDC
Output Current Max: 1.7A
Rated power: 90Watt
Input Voltage: 100~240VAC±10% 47~63Hz
Input Inrush Current(Typ): 20A Max (Cold start@25°C,at AC input 230V)
Input Connetor:IEC320-C8 inlet (2 pin) or IEC320-C6 inlet (3 pin)
Indicator LED: Input power (Green);
Protection:
• Recovers automatically after fault conditions is removed
• Overload protection@145~160%above peak rating
• Shut down o/p voltage.re-power on to recover
Environmental Conditions
• Working Temp:-20°C ~ +60°C ( -4°F to 140°F )
• Working Humidity: 10~90%RH no-condensing
• Storage Temp Humidity: -40°C~ +70°C ( -40°F to 158°F )
• Storage Humidity: 8~90%RH
Safety& EMC
• Safety Standards: CE LVD/ EN60950
• Withstand Voltage: I/P-O/P:3.0KVAC IP-GND:3.0KVAC
• EMC EMI Compliant: EN55022, EN55024; FCC PART15 SUBPART B2010
• RoHS Compliant: Yes
• MTBF: 50,000 hrs
Dimension: 147(172) mm x 62mm x 30mm (L*W*H)
Weight: 240g
Ordering Information
SV-PSE-POE++ |
Starview 10/100/1000Base-T 1-port PoE++ Injector, with external AC power cord |
Download
Download BrochureSupport
Starview Tech Support & Customer Service access you to open troubleshooting tickets