Simplex Single Mode Patch Cord
Features
- The Single Mode Jumper construction is designed to support tough usage, high performance interconnections, easy installation, and saving time
- IEEE 802.3u, IEC 60794, TIA/EIA-568.B.3 compliant
- 9/125µm Single Mode that offers a great wide broadband
- Telcordia GR-326 and IEEE 802.3u/802.3x/802.3z/802.3j standards tested
- 9/125µm Single Mode Riser
- 1.6mm, 2mm, and 3mm Simplex / Duplex
- Fibers offers low insertion loss once joined to connector
- Different type of terminations SC to ST, LC to FC, etc.
Specifications
- Maximum Connector Loss: 0.50 dB
- Typical Connector Loss: 0.30 dB
- Typical Return Loss: -55 dB
- Buffer Material: PVC
- Buffer OD: 900 µm
- Jacket Material: PVC (OFNR riser-rated)
- Jacket OD: 1.8 mm
- Installation Tensile Load: 100 N (445 lbs)
- Long-Term Tensile Load: 50 N (222 lbs)
- Maximum Tensile Load: 100 N/cm
- Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in)
- Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in)
- Crush Resistance: 750 N/cm
- Impact Resistance: 1,000 cycles
- Flex Resistance: 5,000 cycles
- Attenuation at 1550 nm: 0.25 dB/km
- Attenuation at 1310 nm: 0.35 dB/km
- Operating Temperature: -20°C to +70°C
Download
Download BrochureSupport
Starview Tech Support & Customer Service access you to open troubleshooting tickets