STARMUX

 

starmux

  

Starview STARMUX Coarse Wavelength Division Multiplexing (CWDM) Outdoor Distribution Box (ODB) consists of Starview CWDM Mux/ Demux module with metallic LC/UPC connectors enclosed in a PC/ ABS enclosure. STARMUX CWDM uses passive technology that allows any protocol to be transported over the fiber link, as long as it is at a specific CWDM wavelength. The STARMUX provides a simple and affordable method to maximize existing fiber capacity with little or no increased cost.

 

Key Features

• Easy installation and maintenance
• Wall and pole mountable
• IP65 enclosure suitable for outdoor use
• Increase bandwidth on existing fiber infrastructure
• Alleviate fiber exhaustion
• Transmit multiple protocols over an existing fiber link (Simplex or Duplex)
• Provide scalable bandwidth of up to 10Gbps per channel
• Plug and Play, no configuration of CWDM components

 

 

Applications


• Telecommunication Networks
• Cross connect or inter-connect
• Telecom: FTTx, Mobile network and transmission

 

 

 

 

 

 

Specification

Physical Dimension: 250mm x 190mm x 72mm
Installation Dimension: 130mm x 82mm
Weight: 2kg
Colour: White
Operating Temperature: -40°C to 85°C
Operating Humidity: 10% to 95% ( non-condensing)

 

Ordering Information

 

 

Download

 

Download Brochure

Support

 

Starview Tech Support & Customer Service access you to open troubleshooting tickets
 

 

 

 

 

STARMUX-Mini


Starview WDM Mux/Demux Mini

  

STARMUX-Mini consists of a circulator that allows customer to use one single strand of Singlemode optical cable for connecting to a 100G LR4/ ER4/ ZR4
Singlemode optic module. The TX1 and RX1 of one end is connected to the TX and RX port of the module, and the COM port is connected to the optical
cable for transmitting to the other end. On the other end of the device, the TX2 and RX2 is connected to the TX and RX port of the module, to achieve
the single fiber transmission. Each of the STARMUX-Mini supports 1 link of the transmission device for single fiber transmission. The key advantage is it’s
modular design where customer can install a 1U rack cable of inserting up to 24 x STARMUX-Mini. The modules are front accessible and are independent
of each module operation. The chassis can also combine with our STARTAP for splitter applications. The STARMUX-Mini has been designed specifically
with the customer’s application, space constraint and accessibility in mind.

 

Advantages

• STARMUX-Mini for transmitting 100GBase-LR4/ ER4/ ZR4 on one single fiber strand (Circulator)
• Supports 100Gbps LAN-WDM (LWDM) Singlemode wavelengths (1295.6 nm, 1300.1 nm, 1304.6 nm, and 1309.1nm)
• Cost effective solution to save fiber capacity by 50%
• 19” rack mount to house up to 24 modules
• Passive device without affecting the traffic operation

 

 

 

 

 

Specification

Configuration: Port 1 to Port 2 to Port 3
Operating Wavelength: 1310nm±30
Insertion Loss Typical: 0.6dB to 0.8dB
Insertion Loss Maximum: 1.0dB
Channel Peak Isolation: ≥ 48dB
Channel Minimum Isolation: ≥ 40dB
Channel Cross Talk: ≥ 50dB
PDL: ≤ 0.15dB
PMD: ≤ 0.1ps
Return loss: ≥ 50dB
Power Handling: 300mW
Operating Temperature: 0°C ~ +70°C
Storage Temperature: -40°C ~ +85°C
Colour: Black
Chassis Dimension: 44mm x 482mm x 240mm 1RU
Chassis Weight: 2.8kg
Module Dimension: 189mm x 40mm x 13mm
Module Weight: 0.1kg

 

Ordering Information

 

 

 

Download

 

Download Brochure

Support

 

Starview Tech Support & Customer Service access you to open troubleshooting tickets
 

 

 

 

 

starmux

 

Key Features

  • Single fiber transmission able to multiplex 18 CWDM channels (Not many competitors can do 18CH CWDM over 1 single fiber), usually connected at the BBU
  • Single fiber Optical Add and Drop of CWDM channels (available with 3CH/ 4CH/ 6CH/ 9CH), usually connected at the RRU

 

 

CWDM Regenerator

Full Bi-Directional 3R functionality per each service

Flexible, user configurable Multirate Interfaces support for:

  • FE, GbE, 10G Eth LAN/WAN , STM1/4/16/64, OC3/OC12/OC48/OC192, SD-SDI, HD-SDI, 1/2/4/8/10/16G FC
  • CPRI : 614.4Mbit/s, 1228.8 Mbit/s, 2457.6 Mbit/s, 3072.0 Mbit/s, 4915.2 Mbit/s , 6144.0 Mbit/s ,9830.4 Mbit/sec

Performance Monitoring on all interfaces
Transparent, Ultra Low latency 
Integrated CWDM Mux/DeMux) inside the unit
Dual redundant pluggable AC/DC PSU and FAN unit

 

 

Specification

4 Channel Mux/Demux Specific Optical Specs

  • Operating Wavelength: 1500nm ~ 1620nm
  • Center Wavelength (λc): 1510nm ~ 1610nm
  • Max Insertion Loss*: 1.7 dB/channel

5 Channel Mux/Demux Specific Optical Specs

  • CWDM Operating Wavelength: 1500nm ~ 1620nm
  • CWDM Center Wavelength (λc): 1510nm ~ 1610nm
  • 1310nm Ch. Operating Wavelength: 1260nm ~ 1360nm
  • 1310nm Ch. Center Wavelength (λc): 1310nm
  • CWDM Max. Insertion Loss*: 2.0 dB/channel
  • 1310nm Ch. Max Insertion Loss*: 1.0 dB/channel
  • 1310nm Ch. Port Isolation: 30 dB Min.

8/9 Channel Mux/Demux Specific Optical Specs

  • Channel Wavelength:1270nm ~ 1610nm
  • Center wavelength Accuracy:±0.5 nm
  • Channel Spacing:20 nm
  • Channel Passband @-0.5dB bandwidth:>13 nm
  • Insertion Loss:≤2.5 dB
  • Channel Uniformity:≤1.0 dB
  • Channel Ripple:0.3 dB
  • Isolation Adjacent:>30dB (Demux)
  • Isolation Non-adjacent:>40dB(Demux)

16/18 Channel Mux/Demux Specific Optical Specs

  • Channel Wavelength:1270nm ~1610nm
  • Center wavelength Accuracy:±0.5 nm
  • Channel Spacing:20 nm
  • Channel Passband(@-0.5dB bandwidth:>13 nm
  • Insertion Loss:≤3.5 dB
  • Channel Uniformity:≤1.5 dB
  • Channel Ripple:0.3dB
  • Isolation Adjacent:>30dB(Demux)
  • Isolation Non-adjacent:>40dB(Demux)

General Optical Specs(applies to all CWDM configurations)

  • Insertion Loss Temperature Sensitivity:<0.005dB/°C
  • Wavelength Temperature Shifting:<0.002nm/°C
  • Polarization Dependent Loss:<0.1dB
  • Polarization Mode Dispersion:<0.1PS
  • Directivity:>50dB
  • Return Loss:>45dB
  • Maximum Power Handling:500mW

Environment

  • Operating Temperature:-5°C~+75°C
  • Storage Temperature:-40°C~85°C  

Note: Above specification are for device without connector

 

Ordering Information

Support

 

CWDM with dual fiber connection

 CWDM with single fiber connection

Starview Tech Support & Customer Service access you to open troubleshooting tickets

 

 

 

starmux

 

 

 

Key Features

 

  • Single fiber transmission able to multiplex 18 CWDM channels (Not many competitors can do 18CH CWDM over 1 single fiber), usually connected at the BBU
  • Single fiber Optical Add and Drop of CWDM channels (available with 3CH/ 4CH/ 6CH/ 9CH), usually connected at the RRU

 

 

CWDM Regenerator 

Full Bi-Directional 3R functionality per each service

Flexible, user configurable Multirate Interfaces support for:

  • FE, GbE, 10G Eth LAN/WAN , STM1/4/16/64, OC3/OC12/OC48/OC192, SD-SDI, HD-SDI, 1/2/4/8/10/16G FC
  • CPRI : 614.4Mbit/s, 1228.8 Mbit/s, 2457.6 Mbit/s, 3072.0 Mbit/s, 4915.2 Mbit/s , 6144.0 Mbit/s ,9830.4 Mbit/sec

Performance Monitoring on all interfaces
Transparent, Ultra Low latency 
Integrated CWDM Mux/DeMux) inside the unit
Dual redundant pluggable AC/DC PSU and FAN unit

 cw a

 

 

Specification

1 Channel Optical Add/Drop (4 ch. group) Specific Optical Specs

• Operating Wavelength: 1500nm ~ 1620nm
• Center Wavelength (λc): 1510nm ~ 1610nm
• Add/Drop Ch. Max Insertion Loss: 0.7 dB
• Pass Ch. Max Insertion Loss: 1.0 dB

1 Channel Optical Add/Drop (8 ch. group) Specific Optical Specs

• Operating Wavelength: 1460nm ~ 1620nm
• Center Wavelength (λc): 1470nm ~ 1610nm
• Add/Drop Ch. Max Insertion Loss: 0.7 dB
• Pass Ch. Max Insertion Loss: 1.0 dB

General Optical Specs(applies to all CWDM configurations)

• Insertion Loss Temperature Sensitivity (dB/°C): <0.005
• Wavelength Temperature Shifting (nm/°C): <0.002
• Polarization Dependent Loss (dB): <0.1
• Polarization Mode Dispersion (PS): <0.1
• Directivity (dB): >50
• Return Loss (dB): >45
• Maximum Power Handling (mW): 500

Environment

• Operating Temperature:-5°C~+75°C
• Storage Temperature:-40°C~85°C
Note: Above specification are for device without connector

 

Ordering Information

 

 

Support

cw d

 

 

starmux

 

 

Features

• Multi-channel number Low insertion
• Loss and PDL High channel isolation
• MUX and DEMUX functionality
• Qualified under RoHS compliant

 

Applications

• DWDM transmission Metro Area
• Networks Long Haul Networks Building
• Blocks for ROADM

 

Specification

 

Channel Count:4Ch 8Ch 16Ch 40Ch
Channel Center Wavelength：ITU 100 GHz Grid
Center wavelength Accuracy：± 0.05nm
Channel Spacing：100GHz
Channel Passband (@-0.5dB bandwidth)：≥ 0.22nm
Channel Ripple： 0.3
Power Handling Max：500 mW
Operating Temperature：-5°C ~ +75°C
Storage Temperature：-40°C ~ +85°C
Package Dimension：19”case packaging: 540mm x 320mm x 120mm
Weight：Chassis: 1.47KG

4Ch
Insertion Loss：≤ 1.6
Channel Uniformity：≤ 0.6

8Ch
Insertion Loss：≤ 2.5
Channel Uniformity：≤ 1.0

16Ch
Insertion Loss：≤ 3.5
Channel Uniformity：≤ 1.5

40Ch
Insertion Loss：≤ 4.5
Channel Uniformity：≤ 1.2

4Ch 8Ch 16Ch
Isolation Adjacent：> 30
Isolation Non-adjacent：> 40
Polarization Dependent Loss：< 0.1 dB
Polarization Mode Dispersion：< 0.1 PS
Directivity：> 50 dB
Return Loss：> 45 dB

40Ch
Isolation Adjacent：> 25
Isolation Non-adjacent：> 30
Polarization Dependent Loss：< 0.6 dB
Polarization Mode Dispersion：< 0.5 PS
Directivity：> -40 dB
Return Loss：> -40 dB

Remark: Above specification are for device without connector

 

Ordering Information

Download

 

Download Brochure
 

 

 

Support

 

 

Starview Tech Support & Customer Service access you to open troubleshooting tickets

 

 

  1. DWDM OADM

Transceiver Selection

Basic key considerations when selecting a Transceiver are as followings:

  • • Protocol/data rate of application
  • • Transceiver Form Factor: SFP, SFP+,XFP, GBIC, CFP and etc.
  • • Optical transmission distance/ Optical budget required for the link
  • • Type of fiber used:
  • • Singlemode /Multimode
  • • Dual Fiber/Single Fiber
  • • Optical transmitting wavelength (mainly for C/DWDM)
  • • Operating environment and condition (normal temp or high temp)
  • • Type and model no of equipment to be used (for coding purpose)

Note: All Starview Transceiver Modules are shipped with DDM features

Technical Support

+65 6100 DESK (+65 6100 3375)
Customer Portal
Facebook
LinkedIn

Location

Singapore Headquarters
60 Kaki Bukit Place #05-19 Eunos Techpark
Singapore 415979

Tel: +65 3157 5338
Fax: +65 3112 8181

© 2018 Starview International. All Rights Reserved.

Starview International